Home > Magazine Upgrades >

S&W M&P22 Compact 16+1 Round Magazine Kit
M&P Compact | M&P magazine basepad | M&P basepad | Smith & Wesson M&P22 | M&P-22 | S&W M&P | High Capacity | 22lrupgrades | high capacity magazine | magazine upgrade | magazine kit | 22lr magazine | magazine extension


 
Alternative Views:
This magazine kit increases magazine capacity in the Smith & Wesson M&P-22 Compact pistol to 16 rounds. These modifications are not permanent and easily install in minutes. With one (1) in the chamber and 16 in the magazine, that's 17 rounds in the gun! The kit consists of magazine spring, Hi-Viz NicTaylor follower, black anodized aluminum basepad and hex wrench. This kit is NOT for the Full Sized M&P22. If you have the full size M&P22 pistol you can get the 18+1 Mag kit HERE

PLEASE READ BEFORE PLACING YOUR ORDER
Choose whether or not you want your pistol to lock open on the last shot fired. The original magazine kits were sold with the Shockbottle follower THAT DOES NOT lock the slide open on last shot fired. The NicTaylor follower DOES lock the slide open on last shot fired but not like the factory magazine.

Since the button on the factory magazine is removed when installing the high capacity parts, the function of locking the slide open on the last shot fired is lost. That button on the side of the factory magazine is used to actuate the slide lock feature on the gun. The NicTaylor follower is designed to catch the slide itself and thus lock the slide back/open. This technique is used frequently on AR15 22lr conversion kits. However, when doing this the user looses the ability to drop the mag free since the magazine is essentially being stopped from falling free when the mag release is pressed. The user will either have to pull the magazine out or pull the slide back to its most rearward position and manually engage the slide lock. This will allow for the magazine to drop free.
This item CAN NOT be shipped to California


MSRP: $33.95
Our Price: $27.95
Sale Price: $25.95
Savings: $8.00

Shipping: Usually Ships in 1 to 2 Business Days
Part #: 200-16RD-0MPC


Follower:

Qty:  
Installation Instructions RESTRICTIONS
 

1) Remove factory basepad and retainer plate.

2) Remove magazine spring and slide factory follower down to base of magazine so that the load assist pin can be removed from the follower.

3) Remove factory follower.

4) Insert HiCap follower into the magazine body.

5) Insert magazine spring into magazine body.

6) Compress spring into magazine body and slide on the aluminum basepad. Assure that the spring is in the pocket of the basepad.

7) Finger tighten set screw with the included hex wrench.

Share your knowledge of this product. Be the first to write a review »