Home > Gun Parts >

Colt Ace 1911-22 Follower

Colt ace 1911 | GI 1911-22 | Colt 1911-22 magazine | magazine follower | follower magazine spring | 22lrupgrades | 1911-22 | nictaylor00 | early ACE | replacement | triple k | 465M | conversion | magazine | Colt Ace Magazine parts kit | ace magazine
 
Alternative Views:
Replacement follower for the COLT ACE SERVICE MODEL magazine (See the product pictures if you are unsure which magazine you have). Unlike our other followers, this follower is meant to be a direct replacement for the factory follower and DOES NOT add capacity to the magazine. This follower has been modified from the original Triple K conversion magazine to have a slightly larger tab to help engage the slide lock. They are 3D printed from a polycarbonate filament.
International Orders Click HERE
MSRP: $10.95
Our Price: $5.95
Savings: $5.00


Shipping: Usually Ships in 1 to 2 Business Days
Part #: 200-FOLR-CACE
Qty:

Installation Instructions RESTRICTIONS
 
Replacement magazine follower for the Colt ACE 1911-22 Service Model Magazine

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 15 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Works good & installed easily Friday, July 31, 2026
Reviewer: JAS from Chicago, IL United States  
I purchased several of these followers to replace a .22 LR Colt Conversion Kit’s 1950’s pinned magazine base zinc follower which was no longer holding open the slide when empty.  Easy enough to install, just push out the pins in the base from left to right.  The pins are held in place by a spring in base pad and each pin has space in the center of the pin where the spring holds the pin.  Wiggle the zinc bass off from the back.  Remove the spring and there is a space to remove the thumb button.  Drop out the old follower and replace it with the Taylor Tsctical 3D printed one.  I test fired it this weekend and it works great with my 75 year old OEM magazine.  Thanks TT.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Outstanding Service Thursday, May 14, 2026
Reviewer: CJ Everhardt III from Metairie, LA United States  
I ordered the newest Colt Ace 1811-22 follower, installed in magazine, went to range and lo and behold it did not function after a short time. I wrote Taylor and they sent me a replacement ASAP. Second one installed and is still working fine. This company stands behind their products. A very service minded company. Will do business with them again

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent product Friday, January 30, 2026
Reviewer: Colt Houston from Houston, TX United States  
The follower works great only needs minimal filing on the edges so it can move smooth

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
1 of 5 Poorly made followers Wednesday, November 5, 2025
Reviewer: Michael Duerr from Sanborn, NY United States  
The ledge that protrudes from the side of the follower and contacts the slide release lever, to move the release lever up after the last shot, is to small. It should be wider and project out a little more, even if it meant you would have to do a little filing to make it fit. Held the slide open for about 6 rounds, then stopped.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Perfect fix Tuesday, April 30, 2024
Reviewer: Sam Colletti from Lake Villa, IL United States  
Ace 22lr follower locks open on the last round.

Was this review helpful to you?

View All Customer Reviews