Home > AR-15 Parts >

AR Lower & Upper Tension Screw

nylon tipped tension screw | upper and lower tension screw | AR15 screw | AR10 screw | loose upper and lower fix


 
Alternative Views:


Have a loose fit between your upper and lower on your Modern Sporting Rifle? This tension screw can take the annoying wobble out of your AR type rifle and give you a more solid platform. The nylon tipped tension screw allows the shooter to fine tune the upper and lower fit of their AR15 and AR10 style rifles. This tension screw will only work on lowers that have been drilled and tapped for a tension screw to be added. To find out if your lower has the hole, simply push out the rear takedown pin and inspect the lower for the hole (see photos). DOES NOT FIT SAVAGE ARMS AR LOWERS If you have a Savage lower, click HERE for the correct screw.

International Orders Click HERE

Our Price: $1.95


Shipping: Usually Ships in 1 to 2 Business Days
Part #: AR-TENSION-SCREW
Qty:

Installation Instructions RESTRICTIONS
 

1. Remove the grip screw and lock washer from the grip of your rifle. Remove the grip. Mind the spring and detent for the safety as they may bounce out as you remove the grip completely.

2. Using a 1/8" Hex wrench, screw in the tension screw from the hole exposed by removing the grip.

3. With the upper and lower installed, place enough tension on the screw to allow for a snug fit between the upper and lower. Too much tension may cause the upper and lower to be too tight making it difficult to push the rear detent pin.


Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 73 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 July 11, 2024
Reviewer: Adam Fitzer from Evant, TX United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great little enhancement April 3, 2024
Reviewer: Charles Buchanan from NEWPORT NEWS, VA United States  
These are great to have for your AR. Most of the time, it's not needed, but it's good to have when you do.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Tension screws February 6, 2024
Reviewer: Jeffrey Crowe from Parrish, AL United States  
They work perfectly for taking slack out of your ar.thanks guys.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
3 of 5 YMMV December 30, 2023
Reviewer: Scott Henderson from Colorado Springs, CO United States  
I bought this to tighten up a Grendel build. Honestly the play between the Spikes lower and BCM upper is extremely minimal so I'm not really heartbroken at all that it didn't thread into the lower. Looks like it's designed and constructed with quality; three stars for that.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 still working on build. October 1, 2023
Reviewer: mark titus from MI United States  
won't know till done.

Was this review helpful to you?

View All Customer Reviews