Sig Sauer 250 22LR locking / hold open follower

Home > Magazine Upgrades >

Sig P250 22LR Last Round Hold Open Follower

Sig P250 | Sig 250 | 250 | P250 magazine | 250 Magazine | 22lrupgrades | P250 parts | P250 22LR magazine | locking follower | Sig Sauer P250 parts | 250 22LR | sigpower | gsdesigns | locking follower | replacement part | nictaylor00 | P250c22

Alternative Views:

Sig Sauer 250 22LR Last Round Hold Open Follower is a drop-in replacement for the factory follower. This follower locks the slide back on an empty magazine. It does NOT add any additional capacity to the magazine. Use in conjunction with our 14+1 magazine kit seen HERE

PLEASE READ BEFORE PLACING YOUR ORDER
The NicTaylor follower is designed to catch the slide itself and thus lock the slide back/open. This technique is used frequently on AR15 22lr conversion kits. However, when doing this the user looses the ability to drop the mag free since the magazine is essentially being stopped from falling free when the mag release is pressed. The user will either have to pull the magazine out or pull the slide back to its most rearward position and manually engage the slide lock. This will allow for the magazine to drop free.

MSRP: $10.95

Our Price: $7.95

Savings: $3.00

Shipping: Usually Ships in 1 to 2 Business Days
Part #: 200-FOLR-P250

Qty:

Installation Instructions

RESTRICTIONS

1) Depress the spring plug that protrudes from the bottom of the basepad and slide off the basepad.

2) Remove the factory spring and spring plug.

3) Remove the factory follower.

4) Insert "locking" follower, magazine spring and spring plug.

5) Compress the spring and spring plug and slide the basepad into place.

Sig 22LR follower Modification