Home > Magazine Upgrades >

Ruger SR22, 13+1 Round Magazine Upgrade

Ruger SR22 | Ruger SR-22 | High Capacity | 22lrupgrades | high capacity magazine | magazine upgrade | magazine kit | 22lr magazine | shockbottle | nictaylor00 | high capacity magazine parts kit | magazine parts | replacement parts | magazine extension

Alternative Views:

This magazine upgrade you will get additional rounds in the factory 10 round mags. These modifications are not permanent and easily installs in minutes. This upgrade will increase your Ruger's magazine capacity from the factory 10 rounds to 13 rounds. With one (1) in the chamber and 13 in the magazine, that's 14 rounds in the gun!

Choose whether or not you want your pistol to lock open on the last shot fired. The original magazine kits were sold with the Shockbottle follower THAT DOES NOT lock the slide open on last shot fired. The NicTaylor follower DOES lock the slide open on last shot fired but not like the factory magazine.

Since the button on the factory magazine is removed when installing the high capacity parts, the function of locking the slide open on the last shot fired is lost. That button on the side of the factory magazine is used to actuate the slide lock feature on the gun. The NicTaylor follower is designed to catch the slide itself and thus lock the slide back/open. This technique is used frequently on AR15 22lr conversion kits. However, when doing this the user looses the ability to drop the mag free since the magazine is essentially being stopped from falling free when the mag release is pressed. The user will either have to pull the magazine out or pull the slide back to its most rearward position and manually engage the slide lock. This will allow for the magazine to drop free.
International Orders Click HERE
MSRP: $16.95
Our Price: $12.95
Savings: $4.00

Shipping: Usually Ships in 1 to 2 Business Days


Installation Instructions RESTRICTIONS

1. Remove factory basepad by depressing the spring retainer tab located at the bottom of the basepad. While depressing the spring retainer, slide off the factory basepad. CAUTION! This magazine spring is under tension and can "spring out" of the magazine tube along with other magazine parts.

2. Remove the factory spring. Remove the load assist button on the side of the factory follower. At this point you will be able to remove the factory follower.

3. Insert the HiViz follower and the included magazine spring.

4. Compress the magazine spring and spring retainer into the magazine tube and slide on the Basepad. Take note of the orientation of the spring retainer so that the side with the single button lines up with the hole in the basepad. The spring retainer will settle itself into the hole in the Basepad and lock it into place.

Customer Submitted Review

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
5 of 5 Great product and customer service May 27, 2021
Reviewer: Frank Johnson from Philadelphia, PA United States  
I had a typo in my delivery address which caused the product to be returned to sender. The great people at Taylor Tactical didn't waste any time with getting the product sent back out as soon as they could. A+++

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Works as expected February 18, 2021
Reviewer: John Wolff from Lutherville Timonium, MD United States  
Works great

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 February 10, 2021
Reviewer: Robert Capper from Whiteville, NC United States  
Products came fast and worked really well!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Great Product January 28, 2021
Reviewer: DAVID DRAKE from COVINGTON , LA United States  
Good quality, simple install.  Very happy with results giving three more rounds.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Innovative product, solid service September 30, 2020
Reviewer: Matthew Nistico from Clemson, SC United States  
Kits are reasonably priced and don't alter the dimensions of the stock magazines. Kits arrived timely, w/ clear instructions, easy to install, and work perfectly. I appreciate that TT explains so carefully the kit's 2 drawbacks: w/out the stock thumb pin, the new follower can no longer be depressed with your finger to facilitate loading, and won't hold the slide open on an empty mag. Both suck, but are mechanically unavoidable. TT offers 2 versions of this kit for the same $: 1 w/ a follower that allows the mag to drop freely when released, and a different follower that physically blocks the slide, thus restoring the open-chamber-after-last-round functionality, but you must hold the slide back w/ your other hand to drop the mag. I chose the former, preferring to clear the empty mag quickly & cleanly. Upon loading a fresh mag, you must rack the slide, as opposed to just thumbing the slide release. But the total # of steps to switch mags hasn't increased.

Was this review helpful to you?

View All Customer Reviews