Home > Magazine Upgrades >

16 Round GSG / Sig 1911 22 High Capacity Magazine Upgrade - BLACK

16 Round High Capacity Magazine Conversion Kit for GSG and Sig Sauer 1911 22 pistols with black Shockbottle +3 Aluminum Basepad and HiCap follower | high capacity | magazine extension | 22lrupgrades | 411.60.03.1 | Zubringer | 411.60.02.1 | Magazinschuh


 
Alternative Views:


The High Capacity Magazine Upgrade converts your factory 10 round magazine to a 16 round magazine! With a round in the chamber and 16 in the mag, that's 17 rounds in gun! The High Capacity Magazine Upgrade replaces the factory plastic basepad and factory follower with with an aluminum +3 (Plus 3) basepad and High Capacity Follower. The +3 basepad is also longer than the factory plastic basepad and allows for more positive seating of the magazine in the gun. The extra length is a great feature for 1911 pistols with magwells where seating a flush magazine can be difficult. Additionally the aluminum construction is more durable than factory plastic basepads making your magazine less prone to breakage upon dropping.

Choose between the old style Orange or the New Enhanced Blue follower from NicTaylor with improvements over the old orange style. The engagement tab for the slide lock has been increased to help with fully engaging the slide lock. Additionally the rear pin on the follower has been redesigned to help reduce follower tilt and give more reliable feeding. If you have had issues with the orange followers in the past, you need to try this new enhanced follower.
This item CAN NOT be shipped to California

MSRP: $30.95
Our Price: $24.95
Savings: $6.00

Shipping: Usually Ships in 1 to 2 Business Days
Part #: GSG-SIG-16RD-BLK

Click to view another Follower

Follower:


Qty:  
Installation Instructions RESTRICTIONS
 

1) Remove factory basepad and retainer plate.

2) Remove magazine spring and slide factory follower down to base of magazine so that the load assist pin can be removed from the follower.

3) Remove factory follower.

4) Insert HiCap follower into the magazine body.

5) Insert magazine spring into magazine body.

6) Compress spring into magazine body and slide on the aluminum basepad. Assure that the spring is in the pocket of the basepad.

7) Finger tighten set screw with the included hex wrench.


Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 5 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Easy Peasy Install May 19, 2020
Reviewer: Dana from Wisconsin, United States  
First off, you are switching from plastic to metal. Nice! Second, you get to lose that silly plastic bumper plate at the bottom. Just put the spring in and slide on the extender. Fit was perfect and each one slid on as expected. The lock screw is already in place; just tighten it up with the enclosed hex key.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Awesome product April 29, 2020
Reviewer: Darrell from Fort Myers, FL United States  
Install was easy, just need a punch; complicated tools necessary.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 High capacity March 31, 2020
Reviewer: Steve Brooks from Auburn , IN United States  
6 more rounds per mag nice follower and base pad looks good

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Magazine upgrade16 round gsg /1911 22lr high cap m March 25, 2020
Reviewer: Terry Davis from Grand junction, CO United States  
So far pleased haven't been able to shoot much because of the current issues🤬  your service was awesome thank you for that
                        Terry Davis

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 16 round 1911 22 LR extra capacity Mag upgrade March 13, 2020
Reviewer: Henry Morris from Winston, GA United States  
Awesome, easy to install. Holds twice the shots for more practice shots and less load time.

Was this review helpful to you?