Home > AR-15 Parts >

AR15 / AR10 Skeletonized Trigger + Reduced Power Springs

AR15 low cost trigger job | Flat AR trigger | Mil-Spec Reduced Hammer Spring | AR-15 | reduced power spring | trigger job | drop in | 15artriggerjob


 
Alternative Views:
Skeletonized flat trigger for AR type rifles and variants. The Bullmoose flat trigger is a drop in replacement trigger that works with milspec fire control components and is designed to lighten your trigger pull for a precision rifle feel at a fraction of the cost. The flat trigger surface provides an even and consistent trigger pull where ever the operators finger is placed. 4.5-5.5lb trigger pull with milspec springs. Use in conjunction with the included NicTaylor00 reduced powder hammer and trigger springs for an even lighter trigger pull. Both trigger and spring can be installed in a matter of minutes. Finish off your new trigger with a "Speed Hammer" to eliminate the light primer strikes when using light weight springs. You can find the Bull Moose Speed Hammer HERE

*THERE MAY BE RESET ISSUES WITH SOME HAMMERS.

Application: The Reduced Power Hammer Spring is intended for competition and recreational use only and should not be installed in any rifle used for defense or duty applications. By reducing the spring tension, the introduction of light strikes or failures to fire due to the lack of primer detonation may occur.

International Orders Click HERE
Our Price: $29.99


Shipping: Usually Ships in 1 to 2 Business Days
Part #: AR-BM-TRIGGER-SPRING
Qty:

Installation Instructions RESTRICTIONS
 
All you need is a punch or hex wrench small enough in diameter to push out the hammer and trigger pins located in your AR15 lower. Once you push out the hammer pin, the hammer and spring can be removed from the lower. Take note of the orientation of the spring as it sits on the hammer so that you can install the new spring in the same position. Simply pull the spring off the hammer by grabbing one of the coils and pull. Install the NicTaylor00 Reduced Power Hammer Spring onto the hammer and set it aside.

Remove the selector by loosening or removing the grip screw. This will lessen the tension on the selector detent spring and allow the selector to be removed. Push out the trigger pin and lift out the trigger and trigger spring from the lower. Take note of the trigger spring and install the NicTaylor00 Reduced Power Trigger Spring onto the Bull Moose Tactical Skeletonized trigger in the same orientation. Reinsert the trigger / spring and disconnector into the lower and install the trigger pin. Next reinsert the selector making sure the detent is in place, then tighten the grip screw.

Reinsert the hammer/spring into the lower while pushing the hammer pin back into place through the lower. Be careful not to force the pin as you attempt to push it through the lower. Remember the lower is aluminum and the pin is steel, so forcibly hitting the pin or pushing harshly it may cause damage to your lower if all is not lined up perfectly.
Bull Moose Skeletonized Flat Trigger

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 121 Write a review »

  0 of 0 people found the following review helpful:
 
4 of 5 April 17, 2024
Reviewer: Travis  
Really nice light pull. Is a little gritty which is disappointing.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Fantastic March 18, 2024
Reviewer: Charles Eason from Mc Calla, AL United States  
The trigger and springs are awesome. Smooth. Will buy more.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent January 2, 2024
Reviewer: Evan Miller from Clarks Summit, PA United States  
I was hunting for a straight trigger for a while this millspec style unit was priced right and shipped fast, great company, great stuff

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 AR15 / AR10 Skeletonized Trigger + Reduced Power December 15, 2023
Reviewer: John Galloupe from Atlanta, TX United States  
Like it-FAST shipping-I would buy another

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Bull Moose trigger December 11, 2023
Reviewer: Ethan Williams from Saltillo, MS United States  
Excellent quality for the price. Had to do minor polishing to get the trigger to seat correctly. Extremely happy with my purchase. Saved me a good chunk of money over buying a $200 or more fire control group. 10/10 would recommend this product

Was this review helpful to you?

View All Customer Reviews