Smith & Wesson M&P22 18rd High Capacity Magazine Upgrade from NicTaylor00

Home > Magazine Upgrades >

S&W M&P22 18+1 Round Magazine Kit

M&P magazine basepad | M&P basepad | Smith & Wesson M&P22 | M&P-22 | S&W M&P | High Capacity | 22lrupgrades | high capacity magazine | magazine upgrade | magazine kit | 22lr magazine | magazine extension

Alternative Views:

This magazine upgrade you will get additional rounds in the factory 10 and 12 round mags. These modifications are not permanent and easily install in minutes. This upgrade will increase your Smith & Wesson M&P 22 pistol magazine's capacity from the factory 10rd or 12rd magazines to 18 rounds. With one (1) in the chamber and 18 in the magazine, that's 19 rounds in the gun! The kit consists of magazine spring, Hi-Viz NicTaylor follower, black anodized aluminum basepad and hex wrench. This kit is NOT for the COMPACT M&P22. If you have the Compact pistol you can get the 16+1 Mag kit HERE

Please note you will not use the metal pin found in the factory follower. Most people use this pin to aid in loading the magazine. If you have the need for a load assist tool we have two options for you. The first uses the hole in the blue follower to push the follower down. You can find it HERE. The second works more like a traditional magazine loader and can be found HERE

PLEASE READ BEFORE PLACING YOUR ORDER
We recommend using high velocity ammo for this kit. With so many rounds in the magazine, there is more pressure exerted on the bottom of the slide. This pressure is difficult to overcome as the slide attempts to cycle with the use of some low power ammo. Even with high velocity ammo, the slide may not lock back every time on the last shot fired.

MSRP: $33.95

Our Price: $27.95

Sale Price: $25.95

Savings: $8.00

Shipping: Usually Ships in 1 to 2 Business Days
Part #: 200-18RD-MP22

Qty:

Email me when Back-In-Stock

Installation Instructions

RESTRICTIONS

1) Remove factory basepad and retainer plate.

2) Remove magazine spring and slide factory follower down to base of magazine so that the load assist pin can be removed from the follower.

3) Remove factory follower.

4) Insert HiCap follower into the magazine body.

5) Insert magazine spring into magazine body.

6) Compress spring into magazine body and slide on the aluminum basepad. Assure that the spring is in the pocket of the basepad.

7) Finger tighten set screw with the included hex wrench.

Smith & Wesson M&P22 High Capacity Magazine Kit Installation Instructions