Home > AR-15 Parts >

AR15 / AR10 Mil-Spec Trigger Kit

AR15 Mil-Spec Trigger Adjustment Kit | ar15triggerjob | trigger adjustment screw | trigger adjuster | taylor tactical trigger kit | trigger adjusters | ar 15 trigger adjusters | ar15 trigger adjusters | pre-travel | creep


 
Alternative Views:


This ingenious screw design replaces the milspec factory grip screw to remove the trigger creep and travel from factory mil-spec triggers in the AR15 rifle. The kit comes with one(1) grip screw with an internal adjustment screw, one (1) lock washer, one (1) reduced power hammer spring, one (1) reduced power trigger spring and one (1) hex wrench for adjustment of the internal screw. The adjustment screw allows for tweaking the hammer and trigger engagement points to clean up the GI trigger and give you a cleaner trigger pull for increased accuracy. The reduced power springs help reduce the trigger weight for a lighter pull.

Application: The Reduced Power Hammer Spring is intended for competition and recreational use only and should not be installed in any rifle used for defense or duty applications. By reducing the spring tension, the introduction of light strikes or failures to fire due to the lack of primer detonation may occur.

International Orders Click HERE

MSRP: $29.95
Our Price: $19.95
Sale Price: $17.95
Savings: $12.00


Shipping: Usually Ships in 1 to 2 Business Days
Part #: MSR-TKIT-01PK
Qty:

Installation Instructions RESTRICTIONS
 
1. The internal set screw comes with thread locker pre-applied but for best results remove the internal screw and apply additional thread locker and re install the set screw inside the large screw. Make sure to screw down the internal screw all the way in so that the tip just protrudes.

2. Remove the factory grip screw and lock washer from the grip of your rifle. Mind the spring and detent for the safety as they may bounce out if you remove the grip completely.

3. With the hammer cocked and the gun on safe, insert the Trigger Adjustment Screw into the grip and tighten the large screw with a 3/16” hex wrench until he pistol grip is secure.

4. Using the included hex wrench, finger tighten the internal screw inside the 3/16” screw until the it stops. DO NOT OVER TIGHTEN. Backout the internal screw 1/4 turn at a time until the safety lever can by actuated. Verify that the trigger, disconnector, hammer and safety function correctly. Let your additional thread locker dry before putting your rifle to use.

AR15 Reduced Power Hammer Spring Install Instructions
AR15 Trigger Adjustment Grip Screw Install Instructions
The Late Boyscout Video Review
Erik007 Installs the Trigger Adjustment Screw and Light Weight Hammer Spring

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 122 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Great affordable AR enhancements March 6, 2024
Reviewer: John Macasek from Caledonia, MS United States  
Great products that make the AR platform even better.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 worked like a charm February 6, 2024
Reviewer: michael larson from lagrange, GA United States  
installed the trigger kit and made adjustments to
the trigger . POW and were off and running

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Trigger spring kit January 18, 2024
Reviewer: Tony Gasaway from Flat Rock, AL United States  
Changed out the trigger springs with the springs from your kit on my milspec trigger and man what a difference. I don't have a trigger guage but it fills like it dropped the trigger pressure in half which in turn makes it fill smoother. If your like me and can't afford a drop in trigger I highly recommend this spring kit.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Best trigger for the money on the planet! January 4, 2024
Reviewer: Woody from Deatsville, AL United States  
Easy to install and works great every time.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Awesome product November 29, 2023
Reviewer: Nick Adams from White Cloud, MI United States  
I've bought several of these items and highly recommend them to anyone wanting to improve their mil spec triggers performance.  Finished product ends up with a great trigger pull and reset.

Was this review helpful to you?

View All Customer Reviews