Home > AR-15 Parts >

AR15 / AR10 Reduced Power Trigger Spring - 2 PACK

AR15 Mil-Spec Reduced trigger Spring - 2PK


 
This trigger spring is designed to help improve your trigger pull on your MSR (Modern Sporting Rifle). Use this spring with our Reduced Power Hammer Spring and Adjustment Trigger Screw for the best possible trigger. Together, these parts will give you a cleaner trigger pull for increased accuracy. They can be installed in a matter of minutes and works on all GI, Mil-Spec triggers both single and double stage. If you have a trigger in your AR15 or AR10 that is not a complete drop-in solution, this spring will fit your gun.

Application: The Reduced Power Trigger Spring is intended for competition and recreational use only and should not be installed in any rifle used for defense or duty applications. By reducing the spring tension, the introduction of light strikes or failures to fire due to the lack of primer detonation may occur.

International Orders Click HERE
MSRP: $11.95
Our Price: $8.95
Savings: $3.00


Shipping: Usually Ships in 1 to 2 Business Days
Part #: AR15-TRIGGER-SPRING-2PK
Qty:

Installation Instructions RESTRICTIONS
 
All you need is a punch or hex wrench small enough in diameter to push
out the hammer pin located in your AR15 lower.  Once you push out the
hammer pin, the hammer and spring can be removed from the lower. Next push out the pin holding the trigger in place taking note of the
orientation of the spring as it sits on the trigger.  Pull the spring
off the trigger by grabbing one of the coils and pull.   Install the Reduced Power Trigger Spring onto the trigger and reinsert the trigger/spring into the lower while
pushing the trigger pin back into place through the lower.  Next install the hammer/spring into the lower while
pushing the hammer pin back into place through the lower. Be careful
not to force the pins as you attempt to push it through the lower.  
Remember the lower is aluminum and the pin is steel, so forcibly hitting
the pin or pushing harshly it may cause damage to your lower if all is
not lined up perfectly.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 7 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Outstanding service! March 20, 2024
Reviewer: Rick Hansen from Wyoming, MN United States  
Fast delivery and great product!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 June 3, 2022
Reviewer: VAM Munitions from Miami, FL United States  


Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 December 17, 2021
Reviewer: Anonymous Person from GENEVA, FL United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Quality product At A Great Price May 19, 2021
Reviewer: Anonymous Person from Tucson, AZ United States  
Installing reduced power trigger and hammer springs significantly reduced trigger pull weight.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 AR15 / AR10 Reduced Power Trigger Spring August 15, 2020
Reviewer: Greekcop50 from Hanford, CA United States  
Awesome product, will purchase again and fast shipping

Was this review helpful to you?

View All Customer Reviews