Home > Gun Parts >

Colt 1911 22lr Magwell with Arched or Flat Mainspring Housing

Colt 1911 22lr magwell and main spring housing msh | 1911 MSH | 1911 magwell | railgun magwell | 1911-22 parts | 22lrupgrades | Colt railgun parts | 517.200.02.0 | 517.200.03.1 | 517.200.04.1 | 517.200.06.3


 
Alternative Views:


The Colt 1911-22 pistols have many interchangeable parts with standard 45 ACP pistols. However, the magwell is not one of them. The factory 22lr magazine has a wider basepad / floorpate than your typical 45ACP single stack mag and therefore all after market magwells designed for 1911's will not fit the Colt 1911-22 pistol made by Walther / Umarex. Our magwell is designed specifically for the Colt 1911 22LR pistols so that factory magazines and magazines equipped with high capacity NicTaylor00 / Shockbottle basepads and magazine upgrades will fit in the gun.

Our magwell comes with an aluminum main spring housing, main spring housing pin retainer, main spring cap and main spring cap retainer pin. The magwell and main spring housing are constructed of aluminum and machined to close tolerances for a clean fit. Some fitting may be required.


NOTE: IT MAY BE NECESSARY TO REMOVE SOME MATERIAL ON THE ALUMINUM MAINSPRING HOUSING IN ORDER TO GET IT INSTALLED (FITTED) INTO THE PISTOL GRIP.

International Orders Click HERE

MSRP: $89.95
Our Price: $69.95
Savings: $20.00


Shipping: Usually Ships in 1 to 2 Business Days
Part #: COLT-1911-22-MSH-MW


Magwell Color:


MSH Color & Shape:


Qty:  
Installation Instructions RESTRICTIONS
 
1. Remove factory mainspring housing.

2. Check the fit of the new mainspring housing in the pistol. Some fitting may be required.

3. Push out roll pin used to retain the factory mainspring in the factory mainspring housing.

4. Retain the mainspring that is in your pistol.

5.Insert the included mainspring housing pin retainer, your mainspring and the included mainspring cap into the light weight aluminum mainspring housing.

6. Compress all parts listed in step 5, and while compressed insert the included mainspring cap retainer pin into the mainspring housing.

7. With the pistol hammer down, Insert the assembled mainspring housing into the pistol.

8. Insert the factory mainspring housing pin into the frame to secure the main spring housing.

9. Verify that the grip safety functions properly with the new main spring housing.

10. Screw into place the magwell with the included 8-32 screw using a 5/64" hex wrench. Tighten at approximately 15 inch-lbs

NOTE: IT MAY BE NECESSARY TO REMOVE SOME MATERIAL ON THE ALUMINUM MAINSPRING HOUSING IN ORDER TO GET IT INSTALLED (FITTED) INTO THE PISTOL GRIP.

Colt 1911-22 LR Magwell Installation Instructions

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 20 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Magwell kit wlather 1911 Forge H1 February 12, 2024
Reviewer: Felix Maldonado from San German P.R., PR United States  
The part fit in perfect with no mods with really nive aggressive chequering in the strap..

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Magwell January 12, 2024
Reviewer: Bradley Brown from Grove City, OH United States  
Exactly what this gun needed. Fit and finish is top notch. I went with the curved mainspring housing. Fits my hand well.mine needed zero modification for it to fit. Looks amazing.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Perfection June 30, 2023
Reviewer: Jesse james  
The main spring housing with flared mag well along with the new base pads that come with the magazine upgrades work perfectly together I have been running this 22 in combat shoots and it definitely increased my reload time I don’t even have to look just throw it in and keep shooting!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 excellent May 23, 2023
Reviewer: Gerardo chaparro from Denver, CO United States  
great quality

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 magwell with mainspring housing January 23, 2023
Reviewer: Ralph Morton from Ingalls, KS United States  
as described, well made and eye appealing.

Was this review helpful to you?

View All Customer Reviews